Disk Libraries - Getting Started

You can create disk libraries from the CommCell Console or by using the Command Line Interface. For more information on creating disk libraries using command line, see Create a Disk Library Using Command Line.

Before You Begin

Before creating a disk library, make sure to run disk performance tool to test the performance of the read and write operation on a disk.

See Disk Performance Tool for instructions.

Creating a Disk Library

  1. From the CommCell Browser, expand to Storage Resources.
  2. Right-click Libraries, and the click Add | Disk Library.

    The Add Disk Library dialog box appears.

  3. In the Name box, type the name for a disk library.
  4. Select the appropriate MediaAgent from the MediaAgent list.
  5. If the device is a direct-attached library such as SAS/FC/iSCSI for Windows or NFS for UNIX/Linux MediaAgents, define the mount path as a local path.

    If the MediaAgent is a UNIX/Linux MediaAgent, then you must select the Local Path option. To access an NFS share, you must mount the share to your UNIX/Linux MediaAgent. Once the share is mounted, it appears as another local directory on the system. You can provide this directory location in the local path.

    1. Select Local Path.
    2. In the Disk Device box, enter the mount path location.
  6. If the device is on a network, define the mount path as a network path.

    The Network Path option is available only for Windows MediaAgents that use CIFs shares.

    1. Select Network Path.
    2. In the Connect As box, type the user name.
    3. In the Password and Verify Password box, type the password that is used by the backup software to access the network share.
    4. In the Folder box, enter the mount path location.
  7. Click OK.

    The new disk library appears in the CommCell Browser under Storage Resources | Libraries.