Disk Libraries - Online Help
Use this dialog box to add a disk library to a selected MediaAgent.
NameSpecify a descriptive name for the disk library.
Select the name of the MediaAgent that will control the library.
Select this option if you want to specify a local path in the MediaAgent computer.
The local path of the disk storage area where the data will be stored. Click the (...) button to access to the Browse for Mount Path dialog box that allows you to establish a local path in the MediaAgent computer.
Select this option to specify a network path as the target share. The Connect As, Password and Verify Password fields are enabled.
The Network Path button is disabled for UNIX MediaAgents.
The user name that will be used by the system to access the mount path.
The password for the specified user name.
Confirmation of the password for the specified user name.
The network mount path of the disk storage area in which the data will be stored. Click the (...) button to access to the Browse for Mount Path dialog box that allows you to establish a local path in the MediaAgent computer.
Use this dialog box to select the mount paths where you will perform a fragmentation analysis.Device Name
Name of the device.
Mount Path Name
Indicates the disk mount path name.Size
Indicates the size of data in the disk mount path.Date of Last fragmentation Analysis Run
Indicates the date when the last successful fragmentation analysis was performed for this mount path.
Last Analyzed Fragmentation %
Indicates in percent the disk fragmentation reported in the last successful maintenance job.
Use this option to select the mount path for fragmentation analysis.
Use this dialog box to run or schedule a disk maintenance job.Immediate
Select this option to run the job immediately.Schedule
Select this option to create a schedule for this job. Click Configure to configure the schedule options.
Use this dialog box to view or modify the properties of a disk library.
The alias provided by the user for the library. The alias can be changed at any time without affecting the ability to restore data that might have already been backed up using the library.
The name of the MediaAgent that controls the library.
No. of Mount Paths
The total number of mount paths that are defined for the library.
The status of the library.
Enable LibrarySelect the Enable Library option to bring the library online and make it available for use. Clear this option to take the library offline. When a library is offline, all the mount paths are inaccessible to the MediaAgent.
A library's online/offline status reflects its logical availability to the MediaAgent, not its physical availability. For example, a library can be enabled even if it is physically unavailable because of a hardware failure.
Mark Archive Files as Read-OnlyWhen this option is selected, the system creates archive files in the disk library with read-only permissions.
When this option is cleared, the system creates archive files in the disk library with all permissions.
Use this option to create read-only archive files on NetApp SnapLock volumes with access time set according to the retention days (backup or archiver retention days, whichever is higher) specified in the storage policy copy.
- Space Status
Displays the amount of space occupied on the disk. By default, the MediaAgent automatically updates the status of the disk space every 30 minutes. This is done based on the Interval (Minutes) between disk space updates parameter set in the Media Management Configuration dialog box.
Disks that require attention are indicated by a yellow icon. If the amount of space exceeds the maximum limit (that is, 95%), then the Space Status icon is highlighted in red. In this case, you must free up some space or add more space to the volume or modify the mount path.
- Low Watermark (%)
Specifies the minimum amount of free space at which the low watermark warning should be generated. If the amount of free space, for all the combined mount paths, reaches or falls below the low watermark, the system adds an entry in the Event Viewer and sends an Insufficient Storage alert with status Below Low Media Threshold, if configured.
- Warning Watermark (%)
Specifies the amount of free space on the disk at which a warning must be generated. If the amount of free space falls below the specified amount, then the system generates an event message and generates Insufficient Storage alert with status Below Warning Threshold, if configured.
Timeouts (in Minutes)
The timeout parameter determines how long a job waits for a status response after an operation is requested. If the job does not receive a success or failure status within the timeout period, the job is terminated and a failure message is displayed. You can set the following timeout periods:
The number of minutes used to mount the library for read/write operations.
The number of minutes used to unmount the library after a read/write operation.
Indicates the offline reason when the Status of the library is displayed as Offline.
Use this field to enter a description about the disk library. This description can include information about the disk library's content, any cautionary notes, and so on.
Use this dialog box to view or modify the mount path properties of a disk library.
- Disks within this library support Hardware Single Instancing
This option is applicable only in the cases where the underlying storage requires the application files to be written as same files on the disk library.
When this option is selected, the underlying storage is able to do single instancing on these files if the same file content is written multiple times. The data is not written in a container format, where multiple files are combined together into a chunk. For example, Centera supports hardware based single instancing.
This option is not applicable for SnapProtect's Deduplication.
- Prevent accidental deletion of data from mountpaths
Select this option to prevent contents of mount paths (on Windows platforms) from being accidentally deleted. Mount paths created when this option is enabled are protected from accidental deletion.
Mount Path Usage
The following parameters are applicable when there are several mount paths in the disk library:
- Fill and spill mount paths
Specifies that the system should completely consume (fill) the free space in a mount path before using another mount path.
- Spill and fill mount paths
Specifies that the system should round-robin (spill) between the available mount paths for each job.
Thresholds for Managed Disk Space
The following parameters for free disk space is considered for data aging when the Enable Managed Disk Space for disk data option is enabled in the Retention tab of the Copy Properties dialog box.
The following parameters can be established:
- Start aging when data occupied on disk is n %
Specifies the disk capacity in percentage that must be reached before data is aged when the Data Aging operation is run. If necessary, use the space to modify the threshold. Note that any predetermined basic or extended retention rules must be met before the data is aged.
- Stop aging when data occupied on disk is n %
Specified the disk capacity in percentage, when reached, data is not aged during a Data Aging operation. If necessary, use the space to modify the threshold.
Mount Path Allocation Policy
- Maximum Allowed Writers
When selected, maximum concurrent writers on the disk library will be established.
- Allocate number of Writers
By default, maximum concurrent writers are established on the disk library. To limit the number of writers, type the number of writers that you want to allocate.
Use this dialog box to identify the storage policies and the storage policy copies accessing the library. The following information is displayed for each storage policy accessing the library:
- Storage Policy
The name of the storage policy accessing the library.
- Copy Name
The name of the storage policy copy accessing the library.
Use this dialog box to:
- Identify the user groups to which this CommCell object is associated.
- Associate this object with a user group.
- Disassociate this object from a user group.
Displays the names of the user groups that are not associated with this CommCell object.
Displays the names of user groups that are associated with this CommCell object.
Use this dialog box to view the disk usage report.
Disk Space Utilization
Displays the total capacity that is available in the library
Disk Space Savings
Displays the disk space savings when you use deduplication
Average Daily Disk Consumption
Displays the amount of space consumed and freed within the library over a period of time
Use this dialog box to select MediaAgents for which the libraries and drives must be displayed or detected.Available MediaAgents
Lists the MediaAgents available in the CommCell.Selected MediaAgents
Lists the MediaAgents selected for detection.
The following buttons are available:
Allows you to add a MediaAgent that you want to use to detect the libraries and drives. To do this, select a MediaAgent from the Available MediaAgents list, and then click Add.
Allows you to remove a MediaAgent that you do not want to use to detect the libraries and drives. To do this, select a MediaAgent from the Selected MediaAgents list, and the click Remove.
- Add All
Click Add All to include all of the MediaAgents the Available MediaAgents list.
- Remove All
Click Remove All to remove all of the MediaAgents from the Selected MediaAgents list.
Use this dialog box to view or modify the properties of a disk device.Device Name
Initially a unique name generated by the system for the device. Enter a descriptive name for the device.ID Type
The type of physical address used to uniquely identify this volume.ID
The value of the physical identifier (for example, WWN)DRU Host
The name of the DRU host. Use the list to select the appropriate name. The list contains the names of DRU hosts that were added from the DRU Host List dialog box.LUN
Some physical disk devices are divided into sub devices called logical units. Each logical unit is treated as an independent disk device, although several logical units might share the same ID Type/ID pair. Together, the ID Type/ID/LUN represent the unique identity of the physical volume.LB Offset
The first Logical Block on the disk that is assigned to the volume.Block Count
The total amount of blocks on the selected partition or volume.Block Size
The size measured in bytes of each block on the partition or volume.
Use this dialog box to view or modify the properties of a library. All of the options described in this here might not be available. Only the options that appear in the dialog box are applicable to the selected library.Library Name
Displays a unique name that was generated by the system for the library when the library was detected.Alias
A descriptive name for the library. The alias appears in the CommCell Browser for the library.
If necessary, the alias can be modified to provide a descriptive name for the library.
MediaAgentThe name of the MediaAgent that controls this library. This information is displayed for stand-alone drives only.
The library manufacturer.Model
The library model.Firmware
The software version used in the library.
Displays the description that was recorded when the library was configured. This information is displayed for IP libraries only.
Serial NumberThe serial number of the library. (Not applicable for IP libraries.)
WWNThe World Wide Name by which the library is identified within a SAN. (Not applicable for IP libraries.)
Identifies the SCSI ID using the following: port, bus, target, and Logical Unit Number (LUN). This information is displayed for stand-alone drives only.Base Address
Part of the library's internal addressing scheme. (Not applicable for IP libraries.)
For ACSLS libraries, the ascending barcode ranges for volumes that are available in the specified work pool. If necessary, you can add additional volume ranges for the library. Use a dash to specify range and commas to delimit ranges. For example: 000065-000165,000167,000170-000199.
Not applicable for other IP libraries.
Work Pool Number
For ACSLS libraries, this is the work pool number that is associated with the scratch pool.
For IBM 3494 libraries, this is the work pool number that is associated with a work pool that was created manually.Drive Slot Count
Total number of drive slots.Drive Count
Total number of drives that were detected or included in the library.Configured Drive Count
Total number of configured drives in the library.Door Check (Sec)
This interval, expressed in seconds, determines how frequently the system checks to see whether the library door is open. If the door is open during a check, the system conducts a full inventory of the library after the door is closed. This way, if media were manually inserted or removed from the library while the door was open, the inventory is updated. This value is editable only before the library is configured.
If you open and close the door in the interval between checks, the system does not detect the opening and closing, and does not update the library's inventory.
Indicates whether the library is configured as a sighted (library with a bar code reader) or blind (library with no bar code reader) library.
When selected, the library is configured as a sighted library.
When cleared, the library is configured as a blind library.
Is a Virtual Tape Library
When selected, indicates that the library is a virtual tape library. For the library type, select NetApp NearStore for NetApp Near Store libraries and Generic for others.
Automatically create storage policy for new Datapaths
Indicates whether the system must create new storage policies automatically during subsequent library configuration. Applicable only for shared libraries.
Auto Configure DDS Drive Pool
Indicates whether the system must automatically configure the library with a Dynamic Drive Sharing (DDS) configuration if a new data path is found. Applicable only for shared libraries.
Auto Configure Failover Library Controller
Indicates whether the system must automatically create the failover library controllers for shared libraries. Applicable only for shared libraries.
List ACSLS Clean Media
For ACSLS library, when this option is selected, cleaning cartridges that are available for the library's own cleaning function appear in the Media in Library pool in the CommCell Console. When you select this option, the library must be reset for the cleaning media to appear in the CommCell Console.
In addition, this option should be selected in only one of the configured libraries. For example, you have configured each scratch pool (from one physical library ) as a CommCell library. Select this option in any one of the configured libraries.
Use Drive ID for Drive Replacement
For ACSLS library, when this option is selected, the MediaAgent automatically detects new drives if they were swapped or replaced. Select this option in ACSLS Server / libraries that support a serial number for each drive ID. Type the following command in the ACSLS Console to show the serial number for all drives:
display drive * -f serial_num
The system displays both the drive ID and the serial number if that ability is supported. If it is not supported, only the drive ID is displayed.
If the library is associated with a stand-alone drive, Manufacturer is displayed as StandAln, Model as Drive, Firmware as Library and the SCSI Address is the address of the drive. Base Address is not applicable for stand-alone drives.