SnapProtect - Advanced Snapshots - Notes Database iDataAgent

Table of Contents

Managing Snapshots

The snapshots of the data created by the SnapProtect backup are also available for various other operations like list, mount, unmount and delete.

List Snapshots

The browse operation provides the capability to see the snapshots created for an agent, job, or a snapshot copy. The list of the snapshots displayed is corresponding to the entity selected for the browse operation, for e.g., browsing the snapshots for an agent will display all the snapshots created for the selected agent. You can view volume or disk related information for the snapshots. Follow the steps given below to browse snapshots.
  1. From the CommCell Browser, navigate to Client Computers | <Client> | Notes Database | Instance.
  2. Right-click Subclient and click List Snaps.
  3. The Snaps created during SnapProtect operation dialog box displays a list of all the snapshots created for the Notes Database Agent. It also displays important information about each snapshot, including the source path, the source client etc.

    Click the Disk View tab to display the snapshot name, e.g. SP_2_79_1286222629.

Mount Snapshots

You can mount any available snapshot to access the data included in the snapshot. Follow the steps below to mount snapshots:

When mounting multiple snapshots, note the following:

  • You can mount snapshots from different jobs
  • The snapshots selected for mounting should belong to the same agent (such as Windows file system, UNIX file system, or VMware).
  • Snapshots should be mounted on a MediaAgent with the same operating system as the snapshot volumes. For example, Windows volumes should be mounted on a Windows MediaAgent, and Linux volumes should be mounted on a Linux MediaAgent.
  • There are no limits on the number of snapshots to be mounted. However, increasing the number of snapshots that are selected also increases the time for mounting the snapshots.
  • For Virtual Server Agent (VSA), mount snapshots from the backup set or subclient level. Mounting snapshots from the storage policy is not supported.
  • For VMware, mounting multiple snapshots of the same volume at the same time is not supported.
  1. From the CommCell Browser, navigate to Client Computers | <Client> | Notes Database | Instance.
  2. Right-click Subclient and click List Snaps.

    The Snaps created during SnapProtect operation dialog box appears.

  1. Right-click the snapshot that you wish to mount and click Mount.

    To select multiple snapshots, hold <Shift> key and select the snapshots to be mounted.

  2. Click Yes.
  3. In the Mount Path dialog box, specify the destination client and the path on the client in the Destination Client and Destination Path fields.
  4. If you do not wish to save any changes made to the mounted snapshot after the snapshot is unmounted, select Protect Snapshot during mount.
  5. Click OK.

Unmount Snapshots

Follow the steps given below to unmount snapshots:

  1. From the CommCell Browser, navigate to Client Computers | <Client> | Notes Database | Instance.
  2. Right-click Subclient and click List Snaps.

    The Snaps created during SnapProtect operation dialog box appears.

  1. Right-click the snapshot you wish to unmount and click Unmount.

    To select multiple snapshots, hold <Shift> key and select the snapshots to be mounted.

  2. Click Yes when prompted if you want to continue.

If the snapshot does not get unmounted, select the Force Unmount option to mark the snapshot as unmounted.

Delete Snapshots

Snapshots can either be deleted using job-based pruning or from the list of displayed snapshots when browsing snapshots. Data Aging can also be used to define the retention rules and pruning of snapshots. Follow the steps given below to delete snapshots:

  • Manual deletion of snapshots is not recommended. When a snapshot is deleted, it is no longer possible to perform data recovery operations from the snapshot copy. However, if a backup copy was created from the snapshot, data recovery operations can be performed from the backup copy.
  • Ensure that the snapshot to be deleted is not mounted.
  • For NetApp E-series PiT engine, the order to delete snapshots should be the oldest snapshot first.

  1. From the CommCell Browser, navigate to Client Computers | <Client> | Notes Database | Instance.
  2. Right-click Subclient and click List Snaps.

    The Snaps created during SnapProtect operation dialog box appears.

  1. Right-click the snapshot you wish to delete.

    Ensure all snapshots with the same Job ID are selected for a successful deletion operation.

  2. Click Delete.
  3. Enter the confirmation text string, erase snapshots.
  4. Click OK.

Force Delete

The force delete operation is useful when a client, subclient, or a storage policy copy has been deleted or when a source MediaAgent computer is unavailable and you want to delete snapshots from the CommCell database. The force-deleted snapshots are not moved to tape and are not deleted on the array.

  1. From the CommCell Browser, navigate to Client Computers | <Client> | Notes Database | Instance.
  2. Right-click Subclient and click List Snaps.

    The Snaps created during SnapProtect operation dialog box appears.

  1. Right-click the snapshot to select it to force delete.
  2. Click Force Delete.
  3. Enter the confirmation text string, force erase snapshots.
  4. Click OK.

Revert a Snapshot

You can use the revert operation to bring the data back to the point-in-time when the snapshot was taken. This operation overwrites any modifications to the data since the time when the snapshot was created. This option is available if the storage arrays that you are using supports revert. Revert operations are supported on NetApp File Servers but not from SnapVault or SnapMirror snapshots.

Review the following before performing a revert operation:

  • Make sure that the IBM Domino is shut down before performing the Hardware Specific Revert.
  • Log revert is not supported.
  • On Windows clients, disable automount using the following command:

    diskpart> automount disable

  • Make sure the volume is not being used during the revert operation.

  • It is recommended to verify the contents of the backup and ensure that you want to perform a revert operation as it is an irreversible operation.
  • If you plan to perform a revert operation, you will not be able to use the associated storage policy for further auxiliary copy operations.

Perform a Hardware Specific Revert

  1. From the CommCell Console, navigate to Client Computers | <Client>.
  2. Right-click the subclient and click List Snaps.

    The Snaps created during SnapProtect operation dialog box appears.

  3. Right-click the snapshot that you wish to delete and click Use hardware revert capability if available.
  4. Enter the confirmation text string, confirm.
  5. Click OK.

A hardware specific revert operation reverts back the volume included in the snapshot. If the volume being reverted is the source of vault/mirror relation and if the protection topology is Primary-Vault, Primary-Mirror, or Primary-Vault-Mirror, then the baseline snapshot on primary volume will be shifted to the snapshot of the reverted volume. In case of Primary-Mirror-Vault or Primary-Mirror1-Mirror2 topologies, the baseline snapshot for Mirror-Vault relationship and Mirror1-Mirror2 relationship, respectively, is not shifted, which may lead to auxcopy job failures.

The revert operation might delete some snapshots. To avoid failures, when selecting SnapProtect jobs for auxcopy or backup copy operations, unpick all SnapProtect jobs that have deleted snapshots as a result of a revert operation. Running auxcopy or backup copy operations with SnapProtect jobs from deleted snapshots might produce failures.

Snap Reconciliation

Snapshots may be deleted from the array due to factors like low disk space on the array, number of snapshots exceeds the threshold etc., and the jobs corresponding to these deleted snapshots can no longer be used for any data recovery or backup copy operations. You can use the nRunSnapRecon additional setting to start snap reconciliation to check for missing snapshots once in every 24 hours and marks jobs corresponding to the missing snapshots as invalid.

Electing a Job for Backup Copy

You can select a specific job for creating backup copy. Once selected, the Move Snap to Tape field for the specific job will be changed to Picked (i.e., the next backup copy operation will move this job to media).
  1. Right-click a storage policy containing SnapProtect backup jobs, and then click View Jobs.
  2. Right-click the job and then click Pick for Backup Copy.

Disabling a Job for Backup Copy

You can prevent a job from being moved to media. You can apply this option to those jobs that were previously selected for moving to media. On selecting this option, the Move Snap to Tape field for the specific job will be changed to Not Picked (i.e., the next backup copy operation will not move this job to media).
  1. Right-click a storage policy containing SnapProtect backup jobs and then click View Jobs.
  2. Right-click the job and then click Do not Backup Copy.