MediaAgent - Online Help
Use this dialog box to view or change the properties of a MediaAgent.Names
- MediaAgent Name
Displays the display name of the MediaAgent in the CommCell Browser.
- Host Name
Displays the full interface name of the MediaAgent computer.
- CS Host Name
Displays the full interface name of the CommServe computer. This name is used by the MediaAgent to communicate with the CommServe.
Displays whether the MediaAgent software is installed on the Physical or Virtual computer. (Applies only when the software is installed in a clustered environment.)
- Active Physical Node
Displays the MediaAgent Name of the active node. (Applies to MediaAgents in a clustered environment.)
Click to specify a different Client Name, Host Name and/or CS HostName.
- Host OS
Displays the operating system of the host machine in which the MediaAgent is installed.
Displays the processor platform that runs the computer.
Use the space to add MediaAgent-specific information, relevant to your environment.
- NDMP Properties
Indicates whether the MediaAgent is installed with NDMP Remote Server. NDMP Remote Server is installed automatically with the MediaAgent software.
Maximum number of parallel data transfer operations
- Restrict to
Select how many number of concurrent read/write operations need to be established to the MediaAgent.The default number of concurrent read/write operations to a MediaAgent is 25. This value can be set between 1 and 75.
If Optimize for Concurrent LAN Backup option is enabled in the MediaAgent Properties - Control tab, then the default value is set to 100 and this value can be set to a maximum of 500.
Data Integrity Validation
- Validation on Media
When selected, validates the integrity of data stored in the media, during data recovery operations.
- Validation on Network
When selected, validates the integrity of data transferred over the network during data protection operations.
Use this dialog box to establish the control related options for a MediaAgent.
Specifies whether the MediaAgent is online or offline. Select this option to bring the MediaAgent online and make it available for use. Clear this option to take the MediaAgent offline. When a MediaAgent is offline, the libraries and drives controlled by the MediaAgent are inaccessible to the CommCell components.
The MediaAgent's enable status reflects its logical availability in the CommCell; it does not indicate hardware, software or communication failure.
Displays the status of the MediaAgent. (Online/Offline).
Displays the offline reason, when the Status of the MediaAgent is displayed as Offline.
Mark MediaAgent Offline for Maintenance
Specifies whether the MediaAgent is available for data protection, data recovery and auxiliary copy operations.
When selected, the MediaAgent will be unavailable for data protection, data recovery or auxiliary copy operations. However, the MediaAgent will be available to perform other administrative tasks on the devices attached to the MediaAgent, such as Full Scan, Drive Cleaning, etc.
This option is useful when you wish to perform administrative or maintenance related tasks on the devices attached to the MediaAgent.
Automatically detect WORM Tape Media
Specifies whether the MediaAgent must automatically detect a WORM media when it is used in a drive. Enable this option if you plan to use WORM media in the libraries attached to the MediaAgent.
- Optimize for concurrent LAN backups
This option can be enabled when the MediaAgent is used for concurrent data protection operations from a large number of clients. For example, if you have 25 clients concurrently using the MediaAgent for 50 or more data transfer streams in a specific operation window, it is recommended that you enable this option. Enabling this option will help to optimize the Operating System resources on the MediaAgent.
For more information, see MediaAgents - Supported Features, Agents and Devices.
- Auto Update SCSI ID during live operation
Specifies whether the MediaAgent software will automatically update the SCSI ID during a load/unload/read/write operation, if there are issues relating to access path mismatch or HBA fail over.
SCSI/SAN device scan interval (n) hours(s)
Specifies the time interval after which successive SCSI updates can be run on the MediaAgent when a failure is encountered during mount/unmount and read/write operations.
- Mark drive inaccessible on error and perform status check according to device scan interval
Specifies whether the drive controller is marked offline if the MediaAgent is not able to access the device during mount operations. The software automatically scans the devices and re-enables the drive controller when it becomes accessible. Note that if multiple MediaAgents access the drive, the drive would continue to be available to the other MediaAgents accessing the drive.
See MediaAgent Properties in Books Online for detailed information on this option.
Use Native device driver for data transfer for tape media
This option is available only in Unix MediaAgents. Indicates whether the MediaAgent will use the pass-through drivers (provided by the MediaAgent software) or the native driver to communicate with tape devices. Select this option to use the native driver.
Send pass-through commands to Atape on AIX
Option to allow MediaAgent to send pass-through commands to Atape device drivers.
Device access using pass-through driver on Linux
Option to ensure that no other process can access the tape device while SnapProtect processes have the device node open.
Enable retry on network errors
When enabled, the Robust Network Layer feature is enabled allowing the Job Manager to continuously check for network connectivity when loss of connectivity is detected.
- Retry Frequency (seconds):
The interval (in seconds) at which the Job Manager will continuously check for network connectivity.
- Retry Count:
The number of times the Job Manager will check for network connectivity.
Use this dialog box to identify the storage policies and the storage policy copies accessing the MediaAgent. The following information is displayed for each storage policy:
- Storage Policy
The name of the storage policy accessing the MediaAgent.
The name of the storage policy copy accessing the MediaAgent.
- Primary Copy
Indicates whether this storage policy copy is the primary copy or not. (Yes/No)
- MediaAgent in Default Datapath
Indicates whether the MediaAgent is established as the default datapath in the storage policy copy. (Yes/No)
- Dedupe Store Host
Indicates whether the MediaAgent is hosting the deduplication database or not. (Yes/No)
Use this dialog box to view the deduplication database paths and storage policy and storage policy copies accessing this MediaAgent.
Displays the partition location of a deduplication database.
Displays the name of the storage policy and the storage policy copy accessing the MediaAgent.
Free Space on DDB Path
Displays the amount of free space available in the volume in which the deduplication database is configured.
Use this dialog box to establish advanced settings for the MediaAgent.
Secure Disk Storage.
Indicates whether Ransomware Protection is enabled. Select this option to enable Ransomware protection for disk library mount paths and UNC paths. (This option is displayed when disk libraries are configured from Windows MediaAgents. For more information see Protecting Mount Paths From Ransomware.)